King Milling adds new ‘B’ mill to increase overall milling capacity to 16,500 cwts.
As you enter the city limits of Lowell, Mich., in the distance you can see the word “King” spelled out in big red letters above King Milling Co.’s “A” Mill, reflecting in a sense the company’s importance in this small town of 4,000 people, located near Grand Rapids in the west central part of the state.
Nestled in the heart of the downtown area on the west bank of the Flat river, King Milling has been a family-owned and operated company in Lowell for more than 100 years and is a source of local pride as it is the largest flour mill in terms of milling capacity in the state of Michigan.
The first mill in Lowell was built in 1844 on the east bank of the Flat river and was called the Forrest Mill. In 1867, the town’s second mill was built on the west bank of the river — the current site of King Milling — and was called the Superior Mill. When Superior Mill filed for bankruptcy in 1890, it was bought by a local lumber company owned by Francis King, thus the King Milling Co. was born.
In 1900, another local lumberman named Thomas Doyle bought the company, and his three sons — Charles, Renis and William — went to work for King Milling. Management of the company was turned over to William in 1939, and under his direction the size of the business increased substantially. He directed the installation of new water turbines under both mills and oversaw the construction of a new concrete dam across the river to power the mills.
When William died suddenly in 1945, management of the company was passed to his two sons, King, only 23, and Mike, 15. Despite being thrust into such a lofty position at such a young age, the brothers led the company to unprecedented growth over the next 50-plus years until handing over the management duties to King’s son, Brian, and Mike’s sons, Jim and Steve.
In May 2014, King Milling’s management team — Brian Doyle, president; and his cousins, Jim Doyle, senior vice-president; and Steve Doyle, vice-president — sat down with World Grain, Milling & Baking News sister publication, at King’s offices in Lowell to discuss the company’s remarkable history, its recently completed expansion with the construction of a “B” mill, and its vision for the future.
Wide range of products
Over the years, King Milling has gained a reputation as a small company that offers a big menu of products for its customers. Brian Doyle noted that King Milling has more than 100 different product numbers when you include the different-size packages.
“We can mill so many different types of flour right here,” Brian Doyle said. “We’ve got the guys that know how to do it, and we have the software in both mills to be able make those changes and make them fast.”
In an industry characterized by increasing consolidation, King Milling has made its mark by excelling in two key areas.
“Versatility is our biggest strength, and we have the ability to respond quickly to our customers’ needs,” said Jim Doyle.
“We custom mill almost everything,” Brian Doyle added, noting that 95% of its flour products are shipped to customers, mainly commercial bakeries, in the Grand Rapids area and other parts of the state.
To produce these different types of flour, King Milling mills many different types of wheat — hard red spring, hard red winter, hard white, soft red and soft white. All of its soft wheat is harvested in and around Michigan and brought to the mill by truck, while the company brings in hard wheat via rail primarily from the Great Plains states.
“We got into milling hard wheat in the late 1980s,” Brian Doyle said. “We did so as a response to our customers. That was our grandfather’s and fathers’ way of doing things. Whatever the customer wants, we will find a way to do it.”
Brian Doyle said the rationale for building a “B” mill was simple — customers were demanding more flour, and the company needed more production capacity to meet that demand.
“Our storage capacity for flour is now up to 52 truckloads, which enables us to deliver quickly to our customers,” he said.
However, figuring out where to build a second mill in such a landlocked area was anything but simple.
“We are surrounded,” he said. “We have the river on one side, a street on another, and so we just had to shoehorn it in where we could. We thought maybe we could double the width of the old mill. We had some space to make it wider on the west side, but that was really too complicated from a construction standpoint.”
What they opted for was building a separate mill a few meters to the west of the A Mill, with the two facilities connected with a third-floor skywalk.
“It worked out very nicely where we were able to tie it into our existing flour loadout so we didn’t have to rearrange our loadout situation,” Steve Doyle said.
The construction of the “B” mill added about 5,000 cwts of white flour milling capacity, increasing the overall capacity to 12,500 cwts. Grain storage capacity was not increased. King Milling also has 4,000 cwts of capacity for whole wheat flour production, giving it an overall capacity of 16,500 cwts.
“We started doing whole wheat flour in 1982,” Brian Doyle said. “We’ve had a steady demand for it.”
With the addition of the “B” Mill, King Milling’s Lowell facility now ranks as the 29th largest mill in North America (tied with five other mills) in terms of milling capacity, according to figures listed in Sosland Publishing’s 2014 Grain & Milling Annual.
Building the new mill also meant an expansion of bran production. King Milling makes eight different types of bran, which primarily is shipped to large turkey and hog producers throughout the state.
“They use a lot of midds,” Jim Doyle said. “Probably 98% of what we produce is shipped within 100 miles of here. There are a lot of big feed places, and they’re close by. We’re probably doing about 8 to 10 trucks per day.”
King Milling can now store 20 truckloads of midds; prior to the expansion only six truckloads could be stored. The speed in which trucks are loaded with millfeed also has been greatly improved, he said, noting that trucks can be filled in 15 minutes compared to what had been 60 to 90 minutes before the “B” mill and new loadout system were built.
Brian Doyle noted that when construction of the “B” mill began in the fall of 2012 with the pouring of the foundation by a local company, King Milling faced two hard deadlines: deer hunting season and winter.
“They got the foundation poured just before deer hunting season, which was important, because they were going to lose employees to vacation at that point,” Brian Doyle said. “Everybody around here takes off for deer hunting season. It’s almost like a religion. So we got that done, and we were able to start the slipform process in the following spring, right before St. Patrick’s Day.”
Like most projects of this nature, there were problems that needed to be solved.
“It took a little longer to get things going initially, because we had to move two large utilities,” Brian Doyle said. “We couldn’t build the mill on top of a storm drain and a sanitary sewer. We also had to move the loading dock to the other side of the building, and the natural gas service had to be moved.”
King Milling also had to work with the city to upgrade its electrical power from 4,160 voltage to 12,470.
“We ended up changing all existing transformers as well as putting a new transformer in for the new mill,” Jim Doyle said. “It’s now running on all new underground power and wiring. We weren’t anticipating having to do that when we started.”
And because it was building a new facility on a flood plain, King Milling had to work with Michigan’s Department of Natural Resources to get a building permit, which was a months-long process.
The slipform work and the installation of equipment was performed by Todd & Sargent, Ames, Iowa, and most of the milling equipment was supplied by Bühler, Inc., Plymouth, Minn. From pouring the foundation to the beginning of operations, the project took 14 months to complete.
Inside the mill
Steve Doyle said wheat is transferred from grain storage into the cleaning house section of the mill, which includes a magnet, scalper, Bühler’s new Vega High Performance Grain Classifier, scourer, aspirator and Sortex color sorter. After leaving the color sorter, the wheat goes into tempering for 12 to 18 hours before being taken through another short cleaning process that includes another scouring, aspirating and ventilating process.
The wheat then enters the milling section where it passes through a series of Bühler Antares roller mills, including four double highs, two 10-section Bühler Sirius MPAK sifters featuring Novapur sieves as well as purifiers, the first to be used by King Milling in about 40 years.
“We took out purifiers out of the old mill in the 1970s,” Steve Doyle said. “The new mill is primarily hard wheat so we added two new purifiers in there.”
The finished product is transported to eight flour bins, all on load cells, that each hold about 225,000 lbs (2,250 cwts) of flour.
Steve Doyle noted that power factor correction equipment was installed in the “B” mill, which helps optimize energy efficiency.
With the mill located in the heart of downtown Lowell, keeping noise from the plant to a minimum has always been a top priority of the company. In the new mill, King Milling installed silencers on the big noise-making fans inside the plant.
“When you’re standing outside the mill you can’t even tell that it’s running,” Steve Doyle noted.
Another unique feature of the mill is a pneumatics line that takes flour and other products from the A mill through the B mill into loadout.
With the new mill up and running, King Milling’s management said the company has put itself in a position to improve on the foundation of success built by previous generations.
“If we keep our quality up and our costs down, we should be able to continue to compete,” Brian Doyle said. “We’re facing more stringent government regulations all the time, and we have to spend more to satisfy the government that we’re making a quality product. We have an employee that basically all he does is work on those kinds of things. For a small company that’s a big expense. A big company can absorb that easier. As you know, milling is not a high-margin business.”